Welcome to Chuangjiuman Transmission System (Hangzhou) Co., Ltd ! Chinese|English

Chuangjiuman Transmission System (Hangzhou) Co., Ltd

086-0571-86161808

Contact us

086-18506839898

Chuangjiuman Transmission System (Hangzhou) Co., Ltd
Tel : 086-0571-86161808
Fax : 086-0571-86161758
Contact : Mr. Shi
E-mail : zhilishi@hzcjm.com
Add : No. 76, Xingqiao North Road, Xingqiao Subdistrict, Linping District, Hangzhou City
Web : http://www.hzcjm.com

Your location : Home>>News>>Industry News

How is the lubrication of motor bearings used?

Date:2021-01-07 09:45:20

Lubrication should have been used in many places. I remember when I was a child riding a bicycle, there was lubricating oil added to the zipper under the bicycle. Last time a user called me and said that the electric motor had been in use for several years and was not running smoothly. I suggested adding some lubricating oil to try it out? He said it's really much better.

Today we will share some common knowledge about motor bearing lubrication.

one

Time:

The lubrication of the motor bearings should be good. Generally, after running for 3000-5000 hours, the machine should be stopped for maintenance, replenishment or replacement of lubricating grease.

two

check

Before using motors that have been stored or unused for more than two years, the lubrication of the bearings should be checked, and if necessary, lubricating grease should be replenished or replaced.  

three

requirement:

Sealed bearings are used for motors with a center height of 132 and below, while non sealed bearings are generally used for motors with a center height of 160 and above. Sealed bearings do not need to be replaced with lubricating grease during the use of the motor.

four

replace

Non sealed bearings should be regularly replaced with clean lubricating grease. The lubricating grease should be added in an appropriate amount, usually filling one-third or one-half of the cavity between the inner and outer rings of the bearing. Before adding, open the discharge hole or cover plate at the bottom of the bearing cover. After the motor runs for 20 minutes, plug the discharge hole or cover plate. When disassembling the discharge hole plug or cover plate, the power should be turned off and the machine should be stopped.

Actually, they are all very small details, but if these small details are not handled properly, they can also affect the use of the electric motor. The ABB motors produced by the factory come with their own lubricating oil, which are some consumables. We know their purpose and it will be much more convenient in the future.

The Spring Festival holiday is coming soon. Wishing everyone a happy life


Chuangjiuman Transmission System (Hangzhou) Co., Ltd
  • Official Account

  • Work WeChat

All rights reserved:Chuangjiuman Transmission System (Hangzhou) Co., Ltd
Tel : 086-0571-86161808
Fax : 086-0571-86161758
Email : zhilishi@hzcjm.com
Add : No. 76, Xingqiao North Road, Xingqiao Subdistrict, Linping District, Hangzhou City