What should be paid attention to when using a gearbox?

Date:2020-04-20 21:41:23

We all know that improper use of machines can be dangerous, and there are indeed many injuries caused by improper use of machines every year. Therefore, before writing about the knowledge of reducers, we have organized it into six points for the convenience of more users. 
When we use Siemens gearboxes, it can also serve as a small user manual that is applicable to other brands of gear reducers. 
1. Before use, it is necessary to check whether the machine is damaged on the surface and whether there is any oil leakage, which is the primary prerequisite for safety assurance. 
2. It depends on the voltage of the gear reducer. Unstable voltage can easily cause a fire, so it is necessary to add a voltage regulator. 
3. When installing Siemens reducers, ensure that the machine base is stably installed to prevent it from falling off during operation. 
If we add accessories such as couplings, pulleys, and sprockets while using them, we must carefully read the relevant instructions and install them according to regulations to prevent accidents. 
4. If lubricating oil has already been applied to the Siemens gearbox, we do not need to replace the lubricating oil within 16000 hours, which saves materials. 
If we need to use a gearbox in conjunction with a frequency converter, we need to install an additional cooling fan to prevent the Siemens gearbox from overheating. In addition, when using the machine, its rated current cannot exceed the actual current value. 
5. When using, be sure to pay attention to the surrounding environment, such as temperature, humidity, and acidity/alkalinity. The environment is also one of the factors that affect the normal use of the machine. Generally, it can be used at room temperature between -5 ° C and 40 ° C, with humidity kept below 85%, which basically meets the requirements. 
If the reducer is not used, we need to perform appropriate maintenance on it to facilitate future use and prevent damage to the machine caused by factors such as humid environments. 
6. When using, be sure to pay attention to the surrounding environment, such as temperature, humidity, and acidity/alkalinity. The environment is also one of the factors that affect the normal use of the machine. Generally, it can be used at room temperature between -5 ° C and 40 ° C, with humidity kept below 85%, which basically meets the requirements. 
If the reducer is not used, we need to perform appropriate maintenance on it to facilitate future use and prevent damage to the machine caused by factors such as humid environments. 
When we workers operate and use machines, we must work in a formal manner to ensure production safety. There is only a starting point, no end point. 
The only thing we can do is to avoid accidents and losses. This is what we pursue, and it is also something we should persevere, never slack off, and start from ourselves bit by bit.